- Vision system enables the alignment of the PCB and recognizes the dispensing dot. Moreover, the volumetric function is available as a standard function.
- Lower priced.
- AC servo drivers are adopted on all axis so that it achieves high and accuracy.
- No manual adjustment is needed because auto-adjustment of conveyor width and no-adjustment of back-up pin system are available. This means shorter down time.
- Large PCB (460 x 360 mm) can be used, even if it is a compact body.
- Equipped with 3 heads which have adjsutable head speed and stroke.
|
|
| Applicable circuit board size/thickness |
50 x 50 ~ 460 x 360 mm / t = 0.3 ~ 4.0 mm |
| Syringe |
Capacity 30 cc |
| Head Assembly |
3 Heads |
| Nozzle Type |
2S (Twin Small),
2M (Twin-Middle)
2L (Twin-Large)
|
| Accuracy |
 0.15 mm |
| Dispensing Time |
0.12 sec |
| Dispensing Direction |
0 deg 90 deg (1 deg increment) |
| Dispensing Conditions Setting |
12 programmable channels |
| Remaining Adhesive Low Level Warning |
Available |
| Minimum Adjustment Unit |
0.01 mm (x-y) |
| Board Width Adjustment |
Automatic |
| Air Supply |
0.5 Mpa dry and clean air |
| Dimensions / Weight |
1670 x 990 x 1,400 mm / 1,000 kg Approx. |
| Control Method |
32-bit personal computer |
| Function of stability dispensing |
Dispensing conditional automatic selection copes with the change of adhesive volume in the syringe. |
| Power Supply / Power Consumption |
Single phase 200, 220, 230, 240 V 10% / 50/60 Hz 3.0 KVA |
