The Hibex Mercury MDA signifies a new dawn in in-circuit testing. This is
truly a machine made in Singapore with technical know-how from Japan. Hibex
is proud to present a tester based on our 10 years' understanding of the
in-circuit test market and customers production line productions. |
|
| Test Points |
Standard: 288 test points. Expandable to 1920.
(96 test points per relay card) |
| Test Steps |
Maximum 9999 measurement steps |
| Test Time |
Open/Short test:
about 2 seconds/550 test points
Component measure:
1ms-30ms (not including discharge time) |
| Test mode |
3-6 wire, precise on/off selection
Resistance : 0.1ohm-1ohm : 0.001ohm resolution |
| Type of Measurement & Range |
| Resistance: |
0.1ohm-1ohm |
0.001ohm resolution |
|
1ohm-40Mohm |
0.01ohm resolution |
| Capacitance: |
10pF-50µF |
0.1pF resolution |
| Inductance: |
10µH-400H |
0.1µH resolution |
| Diode: |
0.01V-10V |
0.01V resolution |
| Voltage: |
0-10V |
0.01 resolution |
| |
0-50V |
Option |
|
| Software |
Windows-based application :
Edit/Debug/Test/Diagnostics/ Self Test and Management data |
| Pass/Fail Tolerance |
-999% to +999%, or absolute |
| Guarding |
Maximum 10 pins per test step, maximum driving current 500mA |
| Board Size |
Maximum dimension
W: 420mm, D: 290mm, H: 100mm |
| Computer |
| PC |
80486 |
| Monitor |
14 inches |
| RAM |
8 MB |
| Memory |
20 MB or above |
| Floppy Disk Drive |
3.5 inches |
| Printer |
80 column |
| Interface |
ISA slot |
| OS |
Windows 3.1 |
|
| General Requirement |
| Power |
100VAC-260VAC
(manually adjust) |
| Frequency |
50Hz-60Hz |
| Power consumption |
Less than 500VA |
| Humidity |
30%-80% |
|
| Air |
4-6kg/cm2 |
